4 Axis Stepper Motor Driver CNC TB6600 Board Kit

  • Comes with necessary and basic parts for you to make your own machine which are simple and easy to assemble.
  • Equipped with TOSHIBA TB6600 HG driver chip to make the driver board run more effectively.



4 Axis Stepper Motor Driver CNC TB6600 Board Kit



4-Axis stepper motor driver board is equipped with Toshiba TB6600HG driver chip and it can be driving 4 motors at the same time. Also suitable for NEMA 17 or NEMA 23 stepper motor. Has a 12V power supply so it can be used for MACH3 interface board or CNC controller. TB6600 has large driver current, so it’s smooth running, quiet small volume with convenient installation. High performance is suitable for making CNC machines and also other automation equipment.

USB controller board:

Comes with Kit 1 and Kit 2.

So easy to use with strong anti-interference ability. Don’t need to install any USB drivers, also it can be used after being plugged in the computer, suitable for all versions of Windows. USB controller board support MACH3 various versions of software and can also be used  for making engraving machine control system.

5-Axis parallel breakout board:

Comes with Kit 3 and Kit 4.

Like the USB controller board, it also supports MACH3 and other computer software and of course supports parallel port control. Also can control up to 5 stepper motor driver. So easy to tell the input status with LEDs. Powered by 5V USB power supply or also external power source.

Stepper motor:

  • Model: 57 HS 76, also
  • Number of phases: 2-phase
  • Number of lines: 4-wire
  • Torque: 1.89 N.M (270 Oz-in)
  • Shaft Diameter: 8 mm 0.3 inch
  • Axial length: 21 mm 0.8 inch
  • Side length: 57 mm 2.2 inch
  • High: 76 mm 3 inch, also
  • Weight: 1100 g 38.8 oz
  • Phase voltage: 3.08 V
  • Phase current: 2.8 A
  • Resistance: 1.1Ω, also
  • Inductance: 3.6 mH

Switching Power Supply:

  • Protections: Short circuit / overload / over voltage / over temperature
  • Built-in cooling DC fan control
  • Working frequency is 25 kHz
  • Input Voltage: 110 V / 220 V
  • Range of AC input voltage changes by the switch
  • High-efficiency, high reliability
  • 100% full load burn-in test
  • Output Voltage: 36 V
  • Current output: 9.7 A
  • Output Power: 350 W

Shop More Drivers & Controllers Here

Follow us on Facebook

YouTube Videos

SKU: 50112 Category: Tags: , , , ,
Weight26 oz
Dimensions7.9 × 5.8 × 4.3 in

Kit 1, Kit 2, Kit 3, Kit 4

Based on 0 reviews

0.0 overall

Be the first to review “4 Axis Stepper Motor Driver CNC TB6600 Board Kit”

There are no reviews yet.