2.2KW Water Cooled Spindle Motor Kit


  • Runout off: less than 0.001mm
  • Voltage: 220V
  • Speed:0-24000rpm
  • AC Inverters
  • Frequency of Inverter: 0-400Hz
  • The spindle motor applies to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc.
  • 13 x ER20 Collet (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm)

$503.99

2.2KW Water Cooled Spindle Motor Kit

Features: 

Spindle Motor:

  • Size: 80mm, also
  • Power: 2200W, also
  • Voltage: 220V, also
  • Grease Lubrication, also
  • Power Interface: Optional GX16 waterproof air plug, there are marked 1234, 123 were
  • connected to the inverter power supply (U, V, W), 4 connected inverter ground
  • Frequency: 0 – 400Hz
  • Speed: 0 – 24000rpm, also
  • Water Cooling ER11 collet, also
  • Runout off: less than 0.001mm
  • Germany SKS 4pcs bearing, also
  • Bearing type: 2 x 7005C P4 DT & 2 x 7002C P4 DT

Inverter:

  • Type: 2.2KW/220V, also
  • Input: 220VAC/50Hz, also
  • Output: 0-220VAC 3-phase
  • Frequency: 0-400Hz, also
  • Size: 168 x 124 x 161mm

ER20 Collet Set:

  • Gripping Range: 1MM to 13MM
  • (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm,
  • 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm)
  • Run-out tolerance 0.01mm (0.0006″)

Water Pump:

  • Voltage: 220V, also
  • Structure: Single-stage Pump
  • Pressure: High Pressure, also
  • Application: Submersible
  • Usage: Water

5M Water Pipes:

  • Length: 5M
  • Can be connected between Water Pump and Spindle Motor

Spindle Motor Clamp Mount:

  • Diameter: 80mm, also
  • Material: Aluminum,Surface sandblasted, also
  • Application: Wood working industry router, such as wood door milling engraving and cutting, also furniture producing

Package includes:

  • (1) 2.2KW Spindle Motor
  • (1) 2.2KW VFD
  • (13) ER20 Collet (1mm, 2mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12.7mm, 13mm)
  • (1) 75W Water Pump
  • (1) 5M Water Pipes
  • (10) Drill Bits
  • (1) 80mm Spindle Clamp (Free 3pcs screws)
  • (1) 70mm Brush

How to connect:
The package come with two Aviation plugs, just put the little one into the spindle, then use the large one to fix into the little one, then you will see the marked number (1.2.3.4) on the top of large one, Pin 1 goes to terminal U on the vfd. Pin 2 goes to terminal V on the vfd. Then pin 3 goes to terminal W on the vfd. Pin 4 is a ground/common.

Shop More Spindles & Controllers Here

Follow us on Facebook

YouTube Videos

 

SKU: 50238 Category: Tags: , , , , ,
Weight 396 oz

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “2.2KW Water Cooled Spindle Motor Kit”

There are no reviews yet.