400W Air Cooling Spindle Motor ER11 Mach3 52mm
Features:
- Spindle Motor: Work voltage: 12-48VDC
- Rotation speed: 3000-12000r/min
- Power: 400W Torque:500mN.m
- Insulation resistance:>2Megohm
- Dielectric strength:400V
- Operating Voltage: Wide Voltage (DC) DC12V-DC60V (Max 65V)
- Control mode A:
- Default potentiometer control (5K-100K),defaults 10K; B: MACH3 -PWM speed control signal input, external PWM input requirements: level 3.5-12V VPP, frequency 1K- 10KHZ, suitable for MACH3 spindle speed control. 4.
- Rated current: 10A, overload and short circuit protection current 12A. (Over-current cut output, overcurrent indicator flashes, the potential light is off, overcurrent lift).
- 5.soft-start function.
- Prevent excessive current caused by the motor and power damage (default 0 seconds soft start), 0-5 seconds adjustable.
- 6.Control power: 12V120W, 24V240W, 36V360W, 48V480W, 60V600W7.
- Dimensions: Length 75mm * Width 75mm * high 42mm 8.
- Pulse width modulation range: 0% -100%
- Motor Length : 186mm Diameter:52mm
- Axis collet Length: 48mm
- Diameter of Axis collect holder:16mm
- Repeat accuracy: 0.01-0.03mm ER11 collect: 3.175mm
- Wide voltage PWM DC brush motor speed controller:
- Applies to DC12-60V low voltage permanent magnet brushed DC motor
When using a PWM signal control mode, need to unplug Potentiometer, or it will be unable to use PWM mode
Package Includes:
(1) 400W spindle motor with with ER11 3.175 collet
(1) Mach3 PWM speed controller
(1) Mount bracket with screws.
There are no reviews yet.