400W DC Motor Air Cooled Spindle Mach3 Kit
This DC motor air-cooled spindle kit supports the the MACH3 software to control the rotational speed of the spindle motor.
High-speed air-cooled spindle motor, power 400W, maximum speed of 12,000 rpm which is widely used in CNC engraving machine, drilling/milling machine, etc.
- Spindle motor: Can be used for engraving metal or nonmetal materials.
- Weight : 0.9 kg
- ER11 collect: 3.175 mm
- Repeat accuracy: 0.01 – 0.03 mm
- Diameter of Axis collect holder: 16 mm
- Axis collet Length: 35 mm
- Diameter: 52 mm
- Motor Overall length: 186 mm (includes gripping parts and motor)
- Control Mode: Default potentiometer control (5K-100K),defaults 10K;
- Control power: 12 V 120 W, 24 V 240 W, 36 V 360 W, 48 V 480 W, 60 V 600 W
- Pulse width modulation range: 0% -100%
- Mount Bracket:
- Diameter: 52 mm
- Suit for : 400 W Brushless High-speed Air-cooled PCB Spindle Motor
- Weight : 410 g
- Dielectric strength: 400 V
- Insulation resistance: > 2 Megohm
- Torque: 500 mN.m
- Power: 400W, also
- Rotation speed: 3000-1200 0r / min
- Work voltage: 12-48VDC
- PMW Speed Controller: Applies to DC12-60V low voltage permanent magnet brushed DC motor
- Operating Voltage: Wide Voltage (DC) DC12V-DC60V (Max 65V)
- Size : 75 mm x 75 mm x 42 mm
- Support Mach3
MACH3 -PWM speed control signal input, external PWM input requirements: level 3.5-12V VPP, frequency 1K-10KHZ, suitable for MACH3 spindle speed control.
Rated current: 10A, overload and short circuit protection current 12A. (Over-current cut output, overcurrent indicator flashes, the potential light is off, overcurrent lift).
soft-start function. Prevent excessive current caused by the motor and power damage (default 0 seconds soft start), 0-5 seconds adjustable.
(1) 400 W CNC Air-cooled Spindle Motor
(1) PWM Speed controller
(1) Mounting bracket