2.2kw VFD 220V Inverter 1HP or 3HP Input

  • Easy PLC function can realize 16 legs of speed and inverter control function
  • Low output ratting torque 0.5HZ-150%, low speed running ability
  • PID control; advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability
  • This VFD can be use 3phase 220V motor (Water Pump,etc),and only use 1.5 KW motor or below
  • Auto voltage regulation (AVR) technique, for ensuring the inverter load capability
  • With perfect error protection and short circuit starting protection capability



  • Can be the whole frequency band of torque automatic compensation, to compensate for the output torque to meet the user requirements for high torque; to improve the dynamic response and motor control features.
  • Acceleration / deceleration ramp features have a programmable smoothing function
  • E100 series inverter uses a simplified vector control technology, with extensive application of functional blocks.
  • Prevent the speed lose during over-voltage, in running the inverter automatically limit the increase of DC bus voltage
  • Fault and fault query monitoring features
  • Built-in serial communication interface, using standard mod bus communication protocol
  • Have a proportional, integral and differential (PID) control function of the closed-loop control, can be used for process control, such as constant pressure water supply.
  • Built in function of the textile specific swing band
  • Fast current limit (FCL) function, to avoid undue running trip
  • Built-in DC injection braking


  • Input Voltage: 220V(+/-15% )
  • Output Current: 10A
  • Input Frequency: 50-60 Hz
  • Output Voltage: 220VAC
  • Output Frequency: 0-600 Hz
  • Input Phase: Single phase
  • Output Phase: 3 phase

This VFD doesn’t fit 2x110V/AC connection, only useĀ 220V single Phase input.

If your motor is not 24000rpm:

  1. Then you need to change the drive parameters
  2. Then connect 3 phase motor
  3. Before you change the parameters
  4. You need Factory Reset
  5. Then change PD1 to 001
  6. Then you can change the parameters


Weight 45 oz
Dimensions 6.6 × 4.9 × 6.3 in

Based on 0 reviews

0.0 overall

Be the first to review “2.2kw VFD 220V Inverter 1HP or 3HP Input”

There are no reviews yet.